Support
Welcome to the INEOS Scanner
This guide explains every part of the tool, step by step. New here? Start with Getting Started for the full first-time walkthrough.
📺 Prefer to watch?
Video walkthroughs are coming soon — each topic will offer a "Watch the video" link alongside the written steps.
Quick start
1
License the tool — enter your activation code (the installer does this automatically).
2
Plug in your J2534 cable to the vehicle's OBD port and your PC.
3
Turn the key to ON, engine OFF (KOEO).
4
Click Connect (top of the window).
5
Run a Health Scan to read every module and its fault codes.
Browse by window
Every window in the app has a ❓ Help button that opens the matching page below.
Getting started
First time, end-to-end walkthrough.
Connecting
Cable, ignition and the Connect button.
Vehicle Health Scan
Scan all modules, read & clear faults, PDF report.
Control Unit List
Per-module detail: faults, IDs, live data, coding.
Live Data
Real-time gauges and graphs.
Adaptations & Output Tests
Guided service procedures and actuator tests.
Vehicle Coding
Read, save, and write module coding.
TPMS
Tire-pressure sensor relearn and coding.
Dashboard
Build your own live gauge display.
Service Reset
Reset the service interval after maintenance.
Data Browser
Catalog of values each module can report.
Diagnostic Console
Advanced: send manual commands.
Developer Tools
Advanced: trace, scanners, option coding.
Fault Statuses
What Active / Stored / Event mean.
Licensing
Activating and managing your license.
Tip
Hover your mouse over any button in the app for a short description of what it does.
DIAGNOSTICS
Get assistance with setup, activation, licensing, and technical issues.
Contact Technical Support
Contact Us
Have a question or need assistance? Our AVD™ support team is here to help.
support@agileoffroad.com