Installation Guide

Home / Wheels & Tires / Wheel Accessories / Front Wheel Spacers for Sprinter 3500 (Pair) by Agile Offroad Installation Guide

Front Wheel Spacers for Sprinter 3500 (Pair) by Agile Offroad

SKU: AOR142

Installation Manual PDF Download

Installation Manual

Package Includes:

  • (2) AO wheel spacers
  • (12) Front hub bolts
  • Red thread-locker

Installation Steps

1

Lift your vehicle, support it with jack stands, and remove the front wheels.

2

Remove the 6 factory bolts holding the hub spacer to the brake rotor.

3

New hub spacer bolts are supplied with the kit.

4

Remove hub spacer and clean rotor flange of rust and debris.

5

Apply a small amount of anti-seize to where the wheel spacer sits on the rotor flange. Install Agile Spacer.

6

Apply a small amount of red loctite to supplied bolts.

7

Re-install the factory hub spacer.

8

Re-install wheels. Lower vehicle on the ground. Torque hub spacer bolts 140 ft-lbs. Then torque lug nuts to 120 ft-lbs.