Baja Designs 40 Inch LED Light Bar Kit at Agile Off Road
Baja Designs 40″ Roof Light Bar Kit for Sprinter

Baja Designs 40″ Roof Light Bar Kit for Sprinter

$1,709.99

Clear

 

  • 30 days easy returns
  • Be Smarter than dirt.
Guaranteed Safe Checkout

Baja Designs OnX6 Racer Edition LED light bars are designed to project far enough to keep up with the high speeds of your performance vehicle. With its secret mad scientist design, the 40-inch OnX6 Racer Edition gives racers the competitive advantage when maintaining high speeds through and around brutal off-road obstacles. This kit includes 40-inch OnX6 Light Bar, marine-grade waterproof cable gland, and everything needed to build your wire harness for a clean installation (includes Mercedes factory dash switch).

Patterns:
Racer Edition Spot: A 4° beam focus for illumination WAY down the trail or road. The Racer Edition Spot is for speeds of 110+ MPH or if you need to see a mile+ away. This is the latest version for our Team Enlightened racers and is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 5+)

Mercedes Sprinter 1500/2500/3500
Second Generation (NCV3) 2007 – 2018
Third Generation (VS30) 2019+

  • Baja Designs OnX6, 40″ Racer Edition High Speed Spot LED Light Bar
  • Seaview Cable Gland Waterproof Wire Pass-Through
    The Seaview Cable Glands / Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic
  • Switch Gland Fuse Block Wire Loom Harness Kit for Roof Mounted Light Bar

Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color

Wattage/Amps: 252W / 21A
Dimensions: 40″ x 4.29″ x 2.69″
Weight: 15.05 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Additional information

Weight 17 lbs
Dimensions 55 × 6 × 7 in
Sprinter Generation

906 / NCV3, 907 / VS30