0
$0.00
  • An empty cart

    You have no item in your shopping cart

CTEK D250SA Smart Charger

CTEK D250SA Smart Charger

5.00 out of 5 based on 1 customer rating
(1 review)

$295.99

In stock 3 lbs , , , ,

Description

With award-winning Swedish technology, the dual input D250SA can draw its power from smart alternators and other DC sources, making it the ideal charger for vehicles that don’t have access to the main power supply. Its dual input capability means it can draw power from solar and wind sources, in parallel to the alternator. The D250SA is a fully automatic, 5-step charger that supplies up to 20A of power to charge, condition, and maintain any 12V lead-acid service battery from 40-300Ah, including Wet, MF, Gel, AGM, EFB, and Ca/Ca. The D250SA uses patented technology so it’s safe for you and your vehicle’s electronics.
  • Continuous, fully automatic charging while you’re on the move for maximum performance, battery life, and convenience
  • Compatible with smart alterations
  • Protects, charges, and maintains your starter battery – even if the engine is not running – and charges service batteries from your starter battery without the risk of starting problems
  • Fast charging from the alternator and other DC sources – even on short journeys
  • Automatic energy management in a single, easy to use unit – no need for traditional diodes or VSR relays
  • Environmentally-friendly charging with solar or wind
  • Works great in combination with CTEK Smartpass 120 Power Management System
  • Input: 11.5–23V, 25A
  • Output: Max 14.4V (14.7V in AGM), 20A
  • Back Current Drain: Less than 1Ah/month
  • Ambient Temperature: -20°C to +50°C (-4°F to +122°F)
  • Battery Types: All types of 12V lead-acid batteries (WET, EFB, Ca/Ca, MF, AGM, and GEL)
  • Battery Capacity: 40–300Ah
  • Dimensions: 192 x 110 x 65mm (L x W x H)
  • Insulation Class: IP65 (splash and dust proof)

MPN: 40-186

Additional information

Weight3 lbs
Dimensions11 × 6 × 3 in

1 review for CTEK D250SA Smart Charger

  1. 5 out of 5

    (verified owner)

    The CTEK system and the instructions provided by Agile Offroad made the installation into my Sprinter a breeze. Clear sequencing, clear pictures and a quick turnaround on the shipping as soon as I ordered made the process pretty effortless. The only thing that could have been stated on the product details is that you need to purchase a 12″-18″ 2AWG Ground wire to connect the CTEK to the chassis. Other than that, flawless.

Add a review

Your email address will not be published. Required fields are marked *

Contact Information

About Your Vehicle

Photo Upload

In order to provide an accurate quote, we need additional information about your rear differential.
Upload image of ID Tag on the right edge of the differential cover (ex. 3.73 ΔIC24CA Δ606604-3)

Contact Information

About Your Vehicle

This can be measured at any weigh station or truck stop.
This can be measured at any weigh station or truck stop.

Contact Information

About Your Vehicle

This can be measured at any weigh station or truck stop.
Please include any relevant vehicle information including 4x4 conversion type, unique load distribution requirements & other suspension/drivetrain modifications.

Photo Upload

In order to provide an accurate quote, we need photos of specific suspension components.
Upload image of front suspension taken from rear of driver's side front wheel
Upload image of front steering stabilizer (if there is one) showing both ends
Upload image of rear suspension taken from front of driver's side rear wheels
Upload image of the driver's side full profile of your van